LB-ANT2458Q5P
2.4&5GHz Dual Band Rubber Duck Antenna
ราคายังไม่รวม Vat 7%
Tel :095-5544841, 02-7698200
E-Mail : sales@wireless-guru.com
line : @wireless-guru
LB-ANT2458Q5P
2.4&5GHz Dual Band Rubber Duck Antenna
ราคายังไม่รวม Vat 7%
Tel :095-5544841, 02-7698200
E-Mail : sales@wireless-guru.com
line : @wireless-guru
483.00 ฿
CompareLB-ANT2458Q5P
2.4&5GHz Dual Band Rubber Duck Antenna
ราคายังไม่รวม Vat 7%
Tel :095-5544841, 02-7698200
E-Mail : sales@wireless-guru.com
line : @wireless-guru
brands | Mikrotik |
---|
The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!
RB5009UG+S+IN can be powered in 3 different ways:
a) PoE-in from Ethernet port #1
b) DC Jack
c) 2-pin terminal on the side
Like the other models in CCR2004 series, this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1,7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance, and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example.But that’s not all! It also has the best single-core performance per watt and best overall performance per watt among all the CCR devices. Better for the planet, better for the bills, it’s a win-win!
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 – 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.
Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality – up to 150 m).
Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
There are no reviews yet.